Features
The driver supports the standard single-frame capture mode in addition to video streaming when supportted. Furthermore, it supports:
Guiding via ST4 port.
Color and Mono cameras.
8, 10, 12, 14 and 16 bit support. For 10, 12 and 14bit cam ...
Read More...
Features
The Apogee driver should support all features of the Alta and Aspen cameras including
USB or Ethernet connection
Temperature setpoint
Hardware binning
Frame sub-selection
Shutter capture mode; Dark, Bias, Light
Fan speed
Configuratio ...
Read More...
Features
The driver supports capture, binning, and setting temperature (if there is cooler). Furthermore, the following is supported:
Guiding via ST4 cable.
Mono and Color camera supported.
Multiple cameras can be used at the same time.
Gain and ...
Read More...
Features
The Nightscape driver should support all features of the Alta and Aspen cameras including
USB connection
Temperature setpoint
Hardware binning (vertical only. horizontal binning is implemented in software)
Frame sub-selection
Shutter capt ...
Read More...
INDI can control most cameras supported by GPhoto library using the INDI gphoto driver. This includes most DSLRs cameras. Make sure the OS does not mount the camera as a disk-drive as this would prevent the driver from communicating with the camera. ...
Read More...
Features
INDI FLI driver should be able to support all FLI family of CCDs. This includes temperature control, subframing..etc. The PDF driver is an absolute focuser driver that can be used in autofocusing applications.
Operation
Once you're connected, ...
Read More...
Features
The I-Nova driver support all of I-Nova CCDs. Subframing and binning is supported in software. Both gray scale and color modes are supported.
Operation
Once you're connected, you can capture images as FITS from the camera, or use video streami ...
Read More...
INDI can control Imaging Source DMK CCDs via the Video4Linux driver. This includes support for long exposures in addition to video streaming. DMK CCDs are supported in INDI library v0.9.8 or later. Under Ubuntu, you can install the driver via:
Features ...
Read More...
Features
This is the INDI driver for the Lacerta MGEN autoguider. The camera must be powered and connected before you run the INDI driver.
Read More...
Features
The driver support basic capture and adjustment of gain.
Operation
Once you're connected, you can capture images as FITS from the camera.
Read More...
Features
INDI Moravian driver supports all Moravian Instruments (MI) family of cameras & filter wheels.
Operation
Once you're connected, you can capture images as FITS from the camera, control temperature, and set image binning and frame subset. ...
Read More...
