Directory: All Listings 

Features Astrolink4 INDI driver supports AstroLink 4 mini device. AstroLink 4.0 mini device was designed to make astroimaging easier. Contains two focuser controllers, regulated outputs for heaters, peltiers or fans, switchable power outputs, different s ...
Read More...

Features The Astromechanics Light Pollution Meter is a handheld / PC based monitoring tool to measure sky brightness in mag/arcsec2. Measurements are compatible with Unihedrons Sky Quality Meter (SQM). It features : Measure sky brightness in mag/arcs ...
Read More...

Features A GPS device is also required. Many devices are support, please check the hardware compatiblity page before purchasing a GPS device and make sure the GPS device is supported under Linux. The U-Plox AG GPS available from Odroid is one example of ...
Read More...

Features Tip: StellarMate users can simply follow the GPS video tutorial. A GPS device is also required. Many devices are support, please check the hardware compatiblity page before purchasing a GPS device and make sure the GPS device is supported under ...
Read More...

Features INDI GPS NMEA driver is designed to parse GPS NMEA streams to provide location and time updates. Usually, the driver is running on a device like Raspberry PI while the GPS NMEA server is running on a remote device like a phone that resides on th ...
Read More...

Features Provides basic auto guiding interface. Operation Usually the user doesn't control this device directly, but instead uses a client software (such as Ekos) to perform autoguiding and sends pulse commands to the mount using GPUSB.
Read More...

Read More...

Raspberry Pi is an ARM based, credit card sized computer. In addition to the usual computer features, it has two GPIO ports with a total number of 21 pins that can be set (on / off) or read. Moreover, one of those pins can be used as a PWM output. Thus, i ...
Read More...

Read More...

Features myDCP4ESP32 is an enhanced 4-Channel automated Dew Controller designed by Robert Brown, based on an ESP32 WiFi chip. The project is open sourced with details found on the project site. Current features include: Fully automated standalone op ...
Read More...

Read More...

Read More...

Read More...

Read More...

Features INDI Pegasus UPB driver provides complete control over the Pegasus power box including: Power Port Control Power Monitoring USB Hub Control Focus Control Dew Control Environment Monitoring Please make sure the power box is updated to ...
Read More...

Read More...

Read More...

The Seletek is a peripheral controller developed by Lunático. This version of the driver allows to control its basic sensors and one or two focuser (three in the Platypus version) connected to the Seletek. You can check all the details about the driver an ...
Read More...

Features INDI SQM driver support Ethernet-enabled SQM-LE. The driver provides basic averaged readings from the unit including sky brightness and temperature. Operation Before establishing connection, set the IP address of the SQM-LE unit in the main co ...
Read More...

Read More...