HOBYM / CRUX Mounts & TitanTCS
This driver is connected to INDI Library through USB, RS-232, Bluetooth or WiFi.
The Crux TitanTCS driver is released as part of the INDI Library.
The minimum firmware requirement to use with INDI Library is version 3.2.0 or higher.
The current features are:
Slew, Abort, Park, Pulse guide, Latitude/Longitude setting, Date & Time setting
Make sure you have selected the appropriate communication port on the Connections tab before connecting to the mount.
You can choose from the available auto-sensing ports (e.g. /dev/ttyUSB0, /dev/ACM0, /dev/ACM1) or enter the port manually.
The communication speed of RS-232 uses 115,200 BPS unless the user has changed it.
By default, the mount assumes the weight is always below the telescope.
Be sure to sync with the telescope above the weight.
For safety reasons, Goto can only be used after synced.
